Print

Acid does not stand a chance here

meyer POLYCRETE Pumpenschacht

The formation of sulphuric acid by thiobacillus in waste water systems cannot always be avoided by planning. Besides the direct introduction of waste water containing sulphides, unfavourable waste water conditions such as long waste water dwelling times or insufficient oxygen supply can lead to sulphide problems. Due to the controlling framework parameters this often starts from the pump stations.

The polymer concrete material exhibits its extremely tolerance to chemicals under these aggressive environmental conditions. POLYCRETE® is most resistant to aggressive media (pH values from 1 to 12 possible) and is therefore predestined for use as a pump shaft material.

However, the special design of the POLYCRETE® pump shafts offers even more advantages. The deep installation of the shafts (caused through the creation of collection volume underneath the supply pipe level) often results in the need for expensive ground water lowering systems. Here the joint-less, mostly single-part construction of the POLYCRETE® pump shafts is worth cash money. In addition the risk of leaking at the connecting joints is eliminated. The integrated pump sump with concave moulding forms a collecting chamber without sludge deposits. Like the base plate it is made from POLYCRETE® so that the interior of the shaft is completely protected against aggressive media. Of course POLYCRETE® pump shafts are also suitable for installation as cost-efficient sunk shafts.

.

 


  meyer POLYCRETE Puimpenschacht

 

SPECIFICATIONS

Internal diameter
DN
Effective height
max.
Wall thickness

Weight 
pipe
mmmmmkg/m
1000 > 4,5 40 295
1200 > 5,0 50 435
1500 > 4,5 60 660
1600 > 4,0 60 705
1800 > 4,0 70 925
2000 > 5,5 90 1325
2200 > 5,5 100 1620
2400 > 8,0 140 2505
2600 10,0 175 3420
Richtwerte für Abmessungen und Gewichte

 

Downloads

meyer POLYCRETE - Sewer pipes | System manholes | Shaft structuresBrochure (PDF)
Sewer pipes / System manholes / Shaft structures